# Airworthiness Directives; Airbus Industrie Model A320 Series Airplanes
> **Rule** · Final rule. · Published 1998-01-13 · Effective 1998-02-17 · 63 FR 1905
## Document
- **Document number:** 98-207
- **Category:** airworthiness
- **Manufacturer:** Airbus Industrie Model A320 Series
- **Type:** Rule
- **Action:** Final rule.
- **Citation:** 63 FR 1905
- **Publication date:** 1998-01-13
- **Effective date:** 1998-02-17
- **FAA docket:** Docket No. 95-NM-90-AD
## Abstract

This amendment adopts a new airworthiness directive (AD), applicable to certain Airbus Industrie Model A320 series airplanes, that requires an inspection to detect moisture and migrated bushings of the guide fittings of the safety locking pins of the passenger doors, removal of any moisture, application of grease, and reinstallation of any migrated bushing. This amendment also requires installation of a greasing nipple on the guide fitting of the locking pin and on three telescopic rods on the passenger doors. This amendment is prompted by reports of difficulty opening the passenger doors due to jamming of the locking pin. The actions specified by this AD are intended to prevent such jamming of the locking pin, which could result in inability to open the passenger door. This condition, if not corrected, could impede or delay passengers from exiting the airplane during an emergency.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/1998/01/13/98-207/airworthiness-directives-airbus-industrie-model-a320-series-airplanes)
---
*MORVS · CC0 1.0*